WHY USE SEALANT?

WHY USE SEALANT?

How Long Has it Been Since You’ve Been Sealed?

New Asphalt

New asphalt should be sealed one year after paving. This allows the new asphalt to cure and maintain its elasticity. The ideal time frame for sealing asphalt in the Pittsburgh area is between April and October, and year-round for Florida. Sealant cannot be applied during rain.

Existing Asphalt

Depending on the amount of traffic on existing asphalt, sealant should be applied every two to three years. This will ensure a long-lasting, manageable surface that is aesthetically appealing.

How is Sealant Applied?

We utilize the latest technology to apply sealcoating. Our fully contained trailers allow us to sealcoat any asphalt surface with the best results.

Our fully contained trailers are equipped with the following:

9

575-Gallon Sealant Tank

9

Hydraulically controlled, full sweep agitator to keep the sealant and Silica sand properly mixed.

9

Melter for Hot Tar Crack Filling

9

Hydraulic pump for constant pressure during application

9

Spray wand delivering consistent application of the sealant

9

Professional Patented Edger preventing overspray onto unprotected areas

9

Asphalt Squeegee, and Brooms for spreading sealant evenly

Sealant Types

Polymer-Modified Masdterseal (PMM)

This is an environmentally friendly, mineral-filled asphalt emulsion pavement sealer blended with polymers and special surfactants for superior adhesion, flexibility, and durability. Polymer-Modified Masterseal is formulated to be job-mixed with aggregate. Polymer-Modified Mastersel meets ASTM D8099/D80ppM-17 Standard Specification for Asphalt Emulsion Pavement Sealer.

Crack Repair

We use high-pressure air to clean out the cracks. Our fully contained trailers have Melters that allow us to apply a Hot Crack Filler producing a fully sealed crack and preventing further deterioration of the asphalt.

Calculate Your Project Cost Online...

Enter the dimensions of your project into our calculator to determine your project costs now!

Why Use Sealant?

Oxygen and UV rays can cause asphalt to become brittle and crack, allowing water to get beneath the asphalt’s surface and cause significant structural damage. Asphalt sealcoating prevents oil, gas, and water from penetrating the asphalt’s surface, and likewise provides a protective layer against oxygen and UV rays - the primary contributors to cracks in driveways and other asphalt surfaces.

 

Florida Location
PO Box: 460184
Fort Lauderdale, FL 33346
954-779-9811

Pittsburgh Location
PO Box: 97791
Pittsburgh, PA 15227
412-977-1024

info@sealingtheburgh.com

HIC Registration Number PA155343

Copyright © 2023. Asphalt Sealing Company of Pittsburgh LLC. All Rights Reserved.
Copyright © 2023. Asphalt Sealing Company of Pittsburgh LLC. All Rights Reserved.

Asphalt Sealing Company of Pittsburgh LLC

Florida Location

PO Box: 460184
Fort Lauderdale, FL 33346
954-779-9811

Pittsburgh Location

PO Box: 97791
Pittsburgh, PA 15227
412-977-1024

info@sealingtheburgh.com

HIC Registration Number PA155343

©2020 Asphalt Sealing Company of Pittsburgh LLC.
All Rights Reserved.

Skip to content